• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows require repair, you must be careful when working. First, you should put on a pair of safety gloves and cut-resistant gloves to prevent glass shards from cutting you during your work.

A quick fix for a broken window is to apply a plastic cover over the crack. This will stop snow, rain and insects from getting into your home.

Glass that has cracked

Cracked window glass not only makes your home appear less appealing but also allow drafts and other elements to enter the home. If the cracks were caused by an impact (like a baseball or soccer ball) or are the result of stress, like an abrupt temperature change or a sudden temperature change, it's crucial to get them repaired as soon as you can to avoid further damage and ensure that your windows are working correctly.

If your window repairs is cracked but not broken, a quick solution is to use clear tape to cover it. It's a simple and inexpensive solution that provides protection from water, dust bugs and other particles, as well as keeping out the weather.

However, if the crack is severe or is getting worse, you should consult an expert. A glazier who is experienced can determine the root cause of the crack and recommend a suitable repair procedure.

A crack caused by an impact is the most common type of window break, typically caused by a sharp object hitting your window with enough force to fracture it. The cracks typically have a starburst of lines and broken pieces. They can be dangerous when they break loose. This crack can compromise the gas that is between the panes of the double-pane window and reduce its energy efficiency.

Stress cracks are another kind of crack that develops due to extreme temperature changes and other environmental factors. These cracks start around the edges of your window and can eventually expand into full-blown break.

A pressure crack is a more serious crack however it can be fixed. It's usually a curvy line that runs across one or more sides of your window. It could be a result of high or low air pressure, which could cause contraction or expansion of the glass.

If you're willing to go further than nail polish and tape there are several alternatives to fix cracks in your window glass. Glass Repair Film, while more expensive it will provide your windows with more protection and durability. If you'd rather do it yourself, epoxy is an adhesive that can be used to fill in cracks and prevent further damage. It will make your window appear like it never had any cracks in it at any point.

Leaking Windows

If you notice a damp spot under your window, or notice that the wood around it is soft or rotting, it could be time to consider a window repair project. Mildew and mold thrive in humid conditions, which can lead to various issues within your home. They can lead to indoor air pollution, sagging drywall, and can even increase the severity of allergies. If left unchecked they can cause structural damage to the structure of the house.

If the water is coming in from the outside or is visible through the frame, it's a good idea to get a professional to help you with the repairs right away. Leaking windows are among the leading causes of structural damage and mold, so don't leave them untreated.

In many cases, caulking can be used to stop leaks. It is important to clean the area first, however, and then take off any caulking that is old before applying new caulking.

Check the weepholes of the frame for debris. These holes are designed to remove rainwater, but they can also become blocked in time due to insect corpses or other debris.

If windows are double-paned, you'll also need to check the seal between the glass and the frame. This will help to maintain a gas barrier between the panes, making the windows more energy efficient. As time passes the seal will get worn out and let water into your home.

Another indication of leaks is the appearance of water stains on ceiling and walls. These are caused when the drywall is saturated with moisture, which weakens its fibers and causes discoloration. You might also find peeling paint as a result of water destroying its adhesive properties and tearing it away from the wall.

Faux Muntins & Mullions

In the past, muntins (or glazing bars as they are called in the UK), separated and were used to hold the panes of multi-paned windows. After WWII, larger expanses tempered glass were available. They're mostly used as a decorative element in some older homes.

Most of the time it is the case that a small or even a single group of these wooden supports may get damaged by rain or wind leaving cracks in the window. You can repair the majority of these brittle and decaying components.

Clean the affected areas using a cloth and an ammonia-based cleaner that won't leave any residue. Then, take off any loose or rotting parts and use an exacta-knife trim the intersections between the horizontal and vertical painted window muntins. After trimming the intersections using painter's masking tape, you can use the tape to tape off the lower part of the window frame. Now, you can apply a thick layer of white paint, paying special attention to areas that were lightly coated in the first go. Let the paint dry completely before removing the tape and applying another coat.

If the issue is more severe, such as an hourglass-shaped crack in middle of the window, it's best to replace the sash. In these instances you'll need to search for a replacement that is similar to the existing window in both the design and size.

Installing a grid window is a more affordable option. These windows have a full pane of glass with the muntins being attached to the surface creating a divided look. These windows are not as efficient in terms of energy efficiency as traditional windows.

Installing a drip-cap will stop water from getting into the window frame. The majority of home centers sell drip caps in aluminum for around $20. They're a lot easier to install than windowsash replacements, and they'll provide you with the same functions as an authentic muntin or mullion.

Broken Sashes & Frames

A damaged window sash should be a signal that you should call for help. If it's not checked, a damaged sash could cause water leaks, wood rot and more serious issues with the frame and sill. If you've got a damaged sill, you must replace it as soon as you can to ensure that your window is sealed and working.

Often, the issue is caused by worn out or improperly installed the sash cords. It is easy to replace these cords in the majority of double-hung window models. To begin, you'll need to take off the tabs of metal that keep the sash in place. Then, push up on the opposite side of the sash (it doesn't really matter which side) and then pull it towards the opposite side to pull it out. To get access to the sash cords, you'll need to remove the strip that separates the sash.

It is important to examine the metal tabs of the old sash with the new one. If they're different it can be difficult to insert the new one in its place and could affect the way it functions. Luckily, this is easily corrected by simply placing tabs in the correct positions on the new window.

You'll need to inspect the frame of your window, too, for any damage or decay. It's recommended to check it regularly since the wood shrinks and gets worn down over time, especially with exposure to the elements. You should fix any visible damage as quickly as you can to avoid a larger problem.

If your window frames are in poor condition you'll need to treat them using a homemade preserver made using half mineral spirits and half boiling linseed oil. After the treatment has dried, you can restore your frames using high-quality latex paint. A fresh coat of paint will protect your window from the elements as well.