• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If windows with double glazed window repairs panes are joined by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might think about the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows so you can reach the frame. With the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. Again this can easily be repaired by an uPVC window repair near me specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's easy to change a window hinge but it's much easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or due to improper installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to offer suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be unbalanced due to wear, causing a gap where the sash meets frame. If they are beyond repair, it might be necessary to have them realigned. Second, the interlock can also become misaligned. This happens on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.