• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy process, and, with the right tools, it can be done quite quickly. It is important to identify the kind of handle you have as well as the size of its spindle before purchasing a replacement.

Older uPVC window handles have a spur that extends and is locked over a cockspur wedge striker. They can be left or right-handed and need to match when replacing.

What kind of lock and handle do I need?

There are many kinds of window handles made from upvc and locks, each with its particular advantages and uses. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism functions in the way you want it to. As time passes, and with regular use the upvc handles that are on your windows may become damaged and worn out. This makes them less secure and effective. In some instances, they could even fall off completely. If you notice that your upvc window handles have fallen off, it's important to repair them as quickly as you can. This will avoid burglaries and protect your home from burglary.

Luckily, replacing your window handles made of plastic is a fairly simple job that can be completed by almost everyone. You'll require some basic tools, but with appropriate knowledge, it's a straightforward process that should take only a couple of minutes. To begin, you will need to determine the type of lock and handle you have on your upvc window and then find the perfect replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are usually located on the outside of your window. They are flat and feature an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle to the window frame to control the latch.

Cockspur Handles

They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are held to the frame of the window by one screw, and are less secure than other kinds of window handles.

Tilt and Turn Handles

Unlike the other handles made of upvc, tilt and turn handles can both be rotated to open the window, and tilted inwards to allow ventilation. They feature a 7mm spindle on the back and are available both in right and left-handed versions.

It is crucial to determine the spindle's size prior to purchasing a new upvc handles. There are a few that are the exact same size. Drop something into the middle of the hole to check the length. This is the maximum spindle length that will fit in your window.

What is a spindle?

uPVC window handles work in a similar way to doors, by turning the handle to operate an opening inside the frame. The window sash replacement can then be opened and shut. But, at times, these handles can become damaged, especially if they are regularly used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they're not functioning properly.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.

The base of the handle will inform you what type of uPVC it is. There should be a'snap in cover' over one screw which holds the handle base in place. After removing this and you'll be able to observe the second screw that holds the base of the handle in position. Once both screws are removed you should be able to pull the handle away from the uPVC window.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Note the length of the spindle. You'll need to buy a replacement of the same length as the original handle and the locking device.

The spindle wears out and is unable to operate the locking mechanism. This could be due to wear and tear from continuous use or a loosening of the locking mechanism or even rust over time. When this happens it is necessary to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.

How do I take off my old handle?

Window handles can become damaged or destroyed over time. It is important to repair them as quickly as possible to ensure your security. The good news is that replacing a damaged or worn handle is a easy task that can be completed in just over one minute and doesn't require any specialist tools.

To remove the old handle, you must first remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle can be pulled away from the base. A second screw is located at the bottom of the handle. It can also be removed. Once the two screws are removed, the handle will be removed from the base of the window.

Once the old handle is removed, grab the new handle and line up the fixing holes with the holes present in the window frame. There may be a little sticker or caps on the new handle, so take off the caps if needed, and then screw the handle in the frame. Once the handle is in place, it is essential to check that it works by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross-member within the window.

After you have put in the new handle, insert the spindle inside the window lock and tighten it. Once the handle is firmly fixed in place and secured, replace the snap-in cover and screw cap (if appropriate). The handle is now ready to use, so try opening and closing the window a few times to ensure that it functions well and securely.

How do I put in the new handle?

Changing your uPVC window handle isn't difficult, and the process is quite simple. You'll need a screwdriver and a bit of patience. The first thing you need to do is ensure that the old handle is locked and then take out any screws that are visible. you can also replace these by screw caps if you need. Once the handle is removed and you are ready to take an note of the length of the spindle that protrudes from the back of the handle. This is important as it will determine the kind of handle that you will need to purchase.

Espagnolette handles are the most popular type of handle for uPVC windows. The spindle passes through the handle to operate the locking mechanism in the window frame. The handle opens the latch, allowing the window to open. As time passes and Window Handle Replacement with regular use, espagnolette handles may become damaged or impaired and it is necessary to find replacements.

Cadenza handles are a form of uPVC handle that is usually employed with tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are more secure than the espagnolette handles since they only open from the inside. You can replace them with the same procedure as you would with espagnolette handles however, make sure that the new handle is angled and not flat.

Once you've decided on the right handle for you You can simply align the new handle with the screw holes and then screw it in place. After that, you can put the screw covers on and test your new handle. You can do this by dragging the handle between the locked position to the unlocked several times. If you encounter any issues, it might be worthwhile contacting a professional to see if they are able to assist you in solving the issue. They can offer advice on how to solve the issue in a quick and effective way.