• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to install and feel like high-quality. It's crucial to understand that the handle you pick for your window should be suitable for the window.

The primary factor is the step height which is the distance from the handle's nose to the frame or base. Other considerations include locking mechanisms and designs.

Replacement parts

There are a wide range of replacement window handles made of upvc available to buy. They come in many different styles and colors so there's bound to be something that will fit your windows. It's easy to purchase a product on impulse particularly when the handle breaks. It is therefore advisable to do some research before purchasing the replacement. The first step is to know what type of handles made from upvc you have and what the differences are between them. The table below lists the most common handles to help you choose the one that will fit your upvc window.

Espag handles are the most commonly used and are used on the majority of modern double glazed windows replacement glazed windows. They are typically attached to the frame by two screws that screw in from both above and below.

They have a spindle bar at the back that can be of a variety sizes. This will determine the way they operate (either left or right handed). It is important to determine the measurements of the handle you currently have to ensure that you get the correct replacement window seals.

The arm is secured to the frame with two bolts, much like the Espag handle. However, the handle has a low projection so that it doesn't damage your blinds. This is a great option when you want the handle to blend in with your blinds and windows made of upvc.

Cockspur handles resemble Espag handles, however they have a nose which closes over a wedge that sits on the frame of the window. This kind of handle can be found on some older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows and can be operated either by turning the handle or pressing on the top of the window. This opens the window from the inside and allows you to clean the outside without having to go to the ladder or walk over the fence. They also make a great alternative for those with limited mobility and can be a great way to improve security and accessibility at home.

Hints and tips

A lot of people will need to replace their uPVC window handles at some point. It is important to know a few tips and tricks that can help you make the task easier.

Examine the type of handle that is at your home. Based on the type of handle it is connected to and the locking mechanism it utilizes it might be necessary to change the entire handle and lock. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing, uPVC Replacement Window Handles you will need to change them as well as the handle itself.

Fortunately, the majority of uPVC handles are similar and follow industry standard sizing, which makes replacing them a relatively simple process. The first step is to remove the screws from the handles, usually the pozi-drive screws. Once they are removed, you are able to take the handle apart.

If you've got the handle broken, it's an ideal idea to take an inventory of how much of the spindle extends from the base of the handle. This will help you measure the spindle length for a replacement handle. Simply measure the amount that the square peg extends out of the bottom of handle.

This is especially true for inline uPVC windows handles, as they are always straight and will only open to the left or right. They won't work in the middle. If you're not sure of the kind of handle you have at home, it could be a good idea to take a handle from a neighbour's house and see how it functions to get an idea.

Another excellent way to figure out what handed the uPVC window handle is to look at the way the handle turns when operating. Handed handles can turn either clockwise or anti-clockwise. If you're not sure then ask someone to open the window using the handle and see what happens.

Measure the spindle

Selecting the right replacement handle for your windows can be a bit difficult since not all handles are the same size. It is important to measure the spindle accurately when fitting a new handle. This will ensure that the handle fits. There are a variety of types of uPVC window handles and they operate in different ways, therefore it is crucial to know the type of handle you are using and the type of locking system you have.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox inside the window frame. When you turn the handle, it turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are equipped with an "nose" which closes over a wedge-shaped striker block on the frame and they are usually found on older double-glazed uPVC windows. They are also relatively simple and they can be locked with keys. It is more difficult to replace these handles as they are less common than the handles made of espagnolette.

If you have an open tilt and turn uPVC window, you'll require a particular kind of uPVC replacement handle with a different locking mechanism. The handle will tilt the window and allow it to rotate back and forth in order to fully open it. It is essential to select the handle with a spindle that is at least 55mm in order to be able reach the window frame.

You can use the same method to take off and replace this kind of uPVC handle, however you must be careful when unscrewing the old one. You may have to open the window a little larger than usual to ensure that you can access both screws that attach it to the frame. After you have installed your new uPVC handle and ensured that it is in the right position, you are able to tighten the screws, and test the lock to ensure it is working correctly.

Replace the handle with the new one.

Once you have the right handle replacement, it's going to simply screw into the correct position. This will require a screwdriver and could be simpler with an electric one. When screwing, it is important not to over tighten the screws as this could cause the handle to warp or crack.

The other important step when installing the new handle is to put in the spindle. It is the part that runs through the handle and is responsible for operating the locking mechanism within the window. It is essential that the part fits correctly, as this will allow the window to be opened and shut securely.

There are a myriad of different kinds of uPVC handles. They include:

Espagnolette Handles - these are handles that are inline and can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curved design that can be useful for hard-to-reach windows.

Tilt and Turn Handles They are used on tilt and turn windows to control the closing and opening mechanisms.

These are the most common and the majority of uPVC windows have these in place. In the UK, they are commonly referred to as "Bay Windows".

If your uPVC window handle is broken, it can be a major hassle. There isn't any need to replace the entire uPVC window because of a broken handle. There are several simple ways to fix and replace a damaged uPVC window handle.

You can fix your broken window handle quickly by identifying the model and determining the spindle. It is essential to be patient and prioritize security when working with windows or tools, but this is a easy task. It could mean the difference between having a secure and secure home, or a window that can be easily opened. Bridgewater Glass is the place to go if you're in need of help or need to speak with a specialist regarding replacing your window handle. Our team is skilled and knowledgeable to help you with any issue.