• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double glazing repair-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, you will need to find some plastic spacers that assist the new pane to fit properly into the window frame.

If you are going to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor Upvc Window Repairs where they can be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repairs is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, UPVC window repairs and even security. It is crucial to act as soon as you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're happy with the fit, you can tighten the screws until they stay in position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze, it may be the hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a simple process, but it's easier to do when you have a person to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you advice.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges may also become unbalanced due to wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it might be required to realign them. The interlock, which is located on the hinge side of the window, may also become misaligned, again it's possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional as soon as you can.