• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to replace a broken window handle using the appropriate tools. It is important to identify the type of handle and the spindle's length prior to purchasing an alternative.

Older uPVC windows use handles with cockspurs, which have spurs that protrude to lock over a cockspur wedge striker plate. These can be either left or right-handed and need to be matched when replacing.

What kind of lock or handle do you have? I have

There are a variety of upvc window handles and locks, each having their own benefits and purposes. The type of handle that you have will determine whether or not your locking mechanism is effective and if it's easy to open windows. With time and regular use, window handles made of upvc are prone to wear or damage. out, rendering them less secure and effective. In some cases they might even disappear completely. It is crucial to fix your window handle replacement handles made of upvc immediately if you begin to notice they are falling off. This will prevent possible break-ins, and keep your house secure.

It is a good thing that replacing your window handles made of plastic is a fairly simple job that is achievable by nearly everyone. You will need a few basic tools, upvc window Handle replacement but with the proper knowledge, it's an easy task that will only take a couple of minutes. To begin you must determine the kind of handle and lock you have on your upvc window to help you identify the best replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are typically located on the side of your window. They have a flat design and come with an opening that is connected to the locking mechanism on the window frame when it is turned. Inline upvc handles come with a spindle that runs through the middle of the handle into the window frame to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are secured to the frame of the window by one screw, and are less secure than other types of window handle.

Tilt and Turn Handles

Unlike the other upvc handles the tilt and turn handles can be rotated to open the windows and the handle can be tilted to the side to let air flow in. They have a 7mm spindle in the back and are available in left and right-handed versions.

When you are purchasing replacement handles for upvc, it is important to measure the spindle's length because not all handles are the same size. To determine the length of your upvc handle, simply drop something in the middle of the hole and measure how far down it goes before it reaches an obstruction. This is the maximum spindle length that will fit your window.

What is the spindle?

uPVC window handles function in a similar manner to doors. By turning the handle, you will be able to operate a latch within the frame. The latch opens the window, to allow it to be shut and opened. However, in some cases, handles can be damaged, particularly if they are regularly used or exposed to harsh weather conditions. This can leave you needing to replace your uPVC windows handles as they might not be able to operate the window in a proper manner in the future.

There are several different types of uPVC handles available including Espag, Cockspur and Spaded handle options. They are designed to fit inside the uPVC frames in various ways and each handle type uses a specific spindle to lock the mechanism fitted into the window. This is why it is important to know the kind of handle is installed on your uPVC window so you can find the right replacement.

The base of the handle will tell you what type of uPVC it is. There should be a "snap in cover over one screw which holds the handle base in place. When you remove this cover, you will be able see the second screw that holds the handle base in position. After both screws are removed and you are able to pull the handle from the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Be sure to note the length of the spindle since you'll need to ensure that you purchase one that is the same length as your original handle and locking mechanism.

The spindle wears down and is unable to operate the locking mechanism. This could be due damage caused by constant use, a loosening of the locking mechanism or even corrosion over time. If this happens, it is required to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.

How do I take off my old handle?

Through time and regular use, window handles may be damaged or destroyed, and if this happens, it is important to repair them as soon as you can to ensure the safety of your home. The good news is that replacing a damaged or worn handle is a relatively easy task that can be accomplished in just over a minute and doesn't require any specialized tools.

The first step in removing the old handle is to remove the screw located on the top of the base of the handle. Once the screw is removed, the handle can then be removed from the base section. A second screw will be located at the base of the handle. This can also be removed. After both screws are removed the handle can be removed from the base portion of the window.

Once the old handle is removed, take the new handle and align the fixing holes with the holes that are currently in the window frame. There may be a little cap or sticker on the new handle, so take them off the caps if needed, and then screw the handle into its place. Once the handle is in place it is important to test that it works by turning the handle and ensuring that the lock mechanism is activated.

Espag handles have spindles that protrude from the handle and slots into the multipoint locking mechanism that is on the window frame. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom bar crossmember.

Once you have the new handle in place, you can insert the spindle inside the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. Now that the handle is ready to use, open and close the window a few times to make sure it is working properly and securely.

How do I fit the new handle?

It's not difficult to change the handle on your uPVC windows. The process is simple. All you need is a screwdriver and a small amount of patience. First, ensure that the handle that you are replacing is unlocked. Then remove any visible screws. You can also replace them using screw caps. After removing the handle it is necessary to take an note of the length of the spindle that extends from the back of the handle. This is important as it will determine the type of handle you'll need to buy.

Espagnolette handles on uPVC are the most well-known kind of handle. The spindle runs through the handle to activate the locking mechanism in the frame of the window. The handle opens the latch and allows the window to open. In regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are a kind of uPVC handle that is usually used in tilt and turn windows. They feature an extended blade that works an interlocking mechanism that is multipoint within the window. They are more secure than espagnolette handles since they only open from the inside. They can be replaced using the same method as espagnolette handles however you must make sure that the new handle has an angled blade as opposed to one that is flat.

Once you have selected the correct handle, simply align the new handle with existing screw holes before screwing it in place. Then, put the screws on and test your new handle. You can perform this by dragging the handle back and forth from the locked position to the unlocked several times. It is possible to contact an expert to see whether you can solve any issues. They can advise you on how to resolve the problem in a timely and effective way.