• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However, if windows with double glazed window repairs panes are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you plan to try to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues such as sagging. A sagging uPVC window can cause issues with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. With an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and UPVC Window Repairs can spread quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with the breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is easier to do if you have someone to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. First, the hinges because of wear and tear, can become misaligned, this can cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window and can also become misaligned, again it's feasible to give them a good clean, but in some instances it could be necessary to have them replaced.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and uPVC window repairs there may come a point where it is more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as you can.