• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. However, uPVC window repairs if you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional is able to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they are susceptible to a range of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to access the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk can be applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with the breeze. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, creating an opening where the sash meets frame. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can be misaligned. This is located on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be positioned on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be cheaper to replace them than to repair timber windows them. If you encounter any issues with your Upvc window, it's best to consult a professional immediately.