• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes must be inspected regularly for signs of mold, mildew and damage. You can save the cost of repairs in the future by catching these issues early on, before they get out of hand.

The sash is an inside frame that can move vertically up and down in windows that are open. This article will demonstrate how to perform several simple repairs to sash.

Weather Stripping

Wood window sashes provide a classic aesthetic to your home. When properly maintained, they can last for many years. However, they can be damaged or degrade as time passes because of exposure to the elements and normal wear and tear. Fortunately, sash repair specialists can bring your windows back to their original condition and keep them looking fantastic for much longer than newer replacement windows.

The first step for repair sash windows is to address weather stripping. It's found on both the sash and frame. If it's worn or loose, out, it can cause drafts, as well as other issues. To fix it, begin by determining your window's brand and the date of manufacture for the glass (etched in the corner of the glass or on the aluminum spacer between panes). Then, take the sash off and mark its width and height, so you can find replacement weather stripping to match.

Then, remove the sash and set it on a table to allow access to all four sides. If your sash is double-hung, you'll need to remove the weights and the ropes that go with them that should have fallen into the intended pocket in the jamb liner. Once you've taken the sash off and the weights, use a utility knife to remove the old weather stripping at the corners. Then, take it off by hand or using a putty knife.

When the sash is clean it is time to replace the parting stops. These are long pieces of wood that divide the two sashes. Pam prefers to use the standard 1/2-inch by 3/4-inch window trim from the lumberyard. However, you could also use for a scrap piece of lumber.

After removing the parting stops and trimming them to your desired length and thickness, apply a thin layer of glazing compound over the bottom of the sash. Smooth it out using your putty knife and let it dry for a minimum of a day. Once it's fully cured and dried, apply a second coat of acrylic latex paint. This will help protect the putty, and give your sash an updated appearance.

Sash Hardware

The hardware that supports the windows sashes can become worn out over time and use. This could result in the window or door that is difficult to open or close. The good thing is that fixing and replacing this hardware is typically quite simple and inexpensive. If a sash isn't easy to operate try spraying grease into the jamb channel and then open it to see if it fixes the problem. If the issue persists it's likely the sash balance. You'll need remove the window sash to reach this hardware.

Window sashes need to open and close without much effort. However, this could be difficult if the weights are worn out or the sash window repair-to-rail meeting rail is not properly coated. This issue can be caused by a number of reasons, such as lack of maintenance or by the wrong weight rating for the particular sash.

If the hinge arms of a window are starting to slide, this could cause the sash to slide and eventually land on the frame in the corner directly opposite the hinge arm (Photo 1). To remedy the issue, make sure that the sash is in the proper position within the frame opening, and then remove it. If the sash has been screwed to the hinge arm, you'll have to loosen the hinge arm and replace it (Photo 2). Install the new sash next (Photo 3).

Windows that are old, especially in older homes, can be difficult to open and close, due to hinges that are sagging and an overall lack of energy efficiency. In many cases, a few simple repairs can turn these windows into smooth operation again and save the homeowner cash on energy costs.

It is essential to have the tools needed before you begin. Mark the hinge channel location on the frame (Photo 1) using pencil. This will make it easier to position the channel in the correct location after you've completed. Take the sash off and then remove all hardware, including the parting beads cords, chains, and cords that help to hold the sash. Soften any hardened putty using the help of a heat gun set at medium and fitted with an shield for the nozzle. Remove the old sash and keep it in a bag labeled.

Sash Weights

Sash weights are able to be replaced to improve the performance of your window sash and reduce the cost of energy. Sash weights are heavy, lead or iron cylinders, which are enclosed inside a hidden compartment and linked to the moveable the sash with a rope. These weights function as counterbalances and allow you to open and close the upvc window repairs without the need for mechanical or electrical devices. When they fail, sashweights tend to be neglected or not used by homeowners.

It's difficult to retrieve the sash-weight that fell from the cavity, so you'll want to find one that is suitable for the. You will also require a fresh piece of string, a length of sashcord and a few sashpulleys to secure the new weights to the cord.

Mortise and Tenon joints can be used to join old wood windows. Pin punch and hammer can be used to cut off the wood pegs that hold the parts together. The majority of them are large on one side and smaller on the other. It is important to first remove the smaller diameter sides. Sashes made later in the century made use of glue instead of pegs. They can be separated by cutting through the glue line with a knife, then tapping the mortised part loose using a mallet.

After the sash is removed, you can remove the stopper on the sash and get access to the weight pocket. This is usually done through a small hole at the bottom of each jamb. The hole is surrounded by the wooden panel which can be removed to reveal the inside workings.

When the sash has been shut off and the access panel is removed, you can remove the old weight and Sash Window Repair replace it. Be sure to weigh the sash first, as the weights you have might not be the correct size. After the new weight has been installed, you can thread an appropriate length of string through the pulling mechanism. Then, nail the string to your boxed frame. Leave a few inches of space at the top of the string for future adjustments.

Sash Cords

In the majority of old double-hung windows the chain or cord is affixed to the weights. This keeps the sashes within the jamb level. Over time, these cords could break, making it difficult to raise the window. A new sash cord will give you the ability to move the sash upwards and downwards and hold it in place when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are typically fixed or screwed in and will need to be removed or moved. You could employ a hammer and chisel to remove them but it's best to lay down dust sheets before starting any work.

After removing the access panel, you are able to begin to work on the sash. Utilize a flat bar, or chisel to pry the narrow parting beads out of their grooves. These are often wedged in or nailed in, but they can be removed and it's worth your time here. If the sash is still in place, remove the mortise and tenon joints using the help of a hammer and pin or screwdriver, then remove the wood pegs that are on the components. The sash should move freely now, but it may need some lubrication in order to feel less stiff.

Measure the length of the sash chain or sash cord needed to reach the sash slot at the bottom from the pulley on the top of the jamb. Cut the cord or chain and attach it in the previous step. You can either employ a hammer, nail or screws, but nails are less likely to cause damage.

Unless you've bought an item that replaces the old counterbalance system, it is recommended to keep the original balancing weights in place. It's cheap to purchase them from a salvage store and they'll be simple to install once you have the sash opened. Depending on the size and shape of your window, you might need to install one or two sashweights in order to keep the sash open.