• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's simple to replace a broken window handle with the right tools. But it's essential to know the handle's type and spindle's length prior buying an alternative.

Older uPVC window handles have a spur that extends and is locked over the wedge striker for cockspur. These can be right-handed or left-handed and should be compatible when replaced.

What kind of lock and handle do I need?

There are a variety of windows locks and handles made of upvc, each with its own advantages and purposes. The type of handle you are using will determine the ease to open your windows and if the locking mechanism functions according to the plan. With time and regular use, upvc window handles are prone to wear or damage. out, rendering them less secure and effective. In some instances, they could even fall off completely. It is essential to fix your upvc window handles as soon as you begin to notice them falling off. This will prevent possible break-ins and will keep your home secure.

The good news is that replacing your upvc window handles is a relatively simple task that can be completed by anyone. You'll require a few tools, but with the proper knowledge, it's a straightforward process that should only take a few minutes. You must be aware of the type of handle or lock that you have on your window. This will help you choose the correct replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They have a flat design and come with a latch that connects to the locking mechanism of the window frame when turned. Inline upvc handles also come with a spindle that goes through the centre of the handle and into the frame of the window to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame and are not as secure as other types of window handles.

Handles that turn and tilt

In contrast to other handles made of upvc that are tilt and turn, these handles can be turned to open the window and tilted inwards for ventilation. They typically feature a 7mm spindle on the back of the handle. They are available in left and right-handed versions.

When you are purchasing replacement handles for upvc, it is important to check the spindle length since not all of them are the same size. To test the length of your upvc handle simply drop something into the middle of the hole and measure how far down it goes before it reaches an obstruction. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles work similar as doors, with the user turning the handle to activate an opening inside the frame. The window then opens and closed. These handles can be damaged, Cheaper particularly if they're used frequently or exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it properly.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed to fit inside the uPVC frames in a variety of ways and each handle type utilizes a specific spindle to lock the mechanism to the window. This is why it is crucial to identify the kind of handle you have on your uPVC window so you can get the correct replacement.

You can find out what kind of uPVC handle you have by taking a look at the base of the handle. A snap-in cover should be over the screw that holds the base of the handle in place. Take it off and you should be able to see the second holding screw located at the opposite end of the base portion of the handle. Once both screws have been removed, you should be able pull the handle from the uPVC.

Once you have removed the uPVC window handle, you have to carefully remove the old spindle from the locking mechanism. Make note of the length of the spindle since you will need to ensure that you purchase a replacement window seals that has the same length as your original handle and locking mechanism.

The main issue with most uPVC window handle problems is that the handle spindle gets worn out and can no longer function properly with the locking mechanism. This could be due to corrosion, damage caused by constant use or the locking mechanism becoming looser. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can be damaged or even broken over the course of time. It is crucial to fix them as quickly as you can to ensure your security. It is easy to replace a worn or damaged handle. The job can be completed in less than a minute without the need of special tools.

The first step in removing the handle that was previously used is to remove the screw that is situated on the top of the handle base. Once the screw is removed, the handle can be removed. A second screw will be situated at the base of the handle. It can also be removed. After these two screws have been removed, the handle will be detached from the base of the window.

After removing the handle, align the fixing holes of the new handle to the holes already present in the window frame. If there is a sticker or cap on the new handle, remove it if necessary and then screw the handle into place. Once the handle is set, it is crucial to verify whether it functions by turning the handle and ensuring that the lock mechanism activates.

Espag handles feature a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle inside the window lock and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is securely fixed. Once the handle is ready for use, you can open and close the window a couple of times to make sure that it functions properly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult and the process is actually very simple. All you require is a screwdriver, and a small amount of patience. First, ensure that the handle that you are replacing is unlocked. Then remove any screws that are visible. You can also replace them using screw caps. After removing the handle you will need to note the length of spindle that extends from the back. This is vital because it will determine the kind of handle you will need to buy.

Espagnolette handles made of uPVC are the most well-known type of handle. The spindle passes through the handle to activate the locking mechanism in the frame of the window. When the handle is turned, it opens the latch on the window and allows it to open. When used regularly and over time, handles for espagnolette may become damaged.

Cadenza handles are a form of uPVC handle that is usually employed with tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than the espagnolette handle as they can only open from the inside. You can replace them using the same method that you would with espagnolette handles however, make sure that the new handle is not angled and flat.

Once you've decided on the right handle to purchase, you can simply align the new handle with the existing screw holes, and then screw it into place. You should then put the screws back on and verify that the new handle is working correctly. You can perform this by moving the handle back and forth from the locked position to the unlocked a few time. If you experience any issues, it could be worthwhile contacting a professional to determine if they can assist you in solving the issue. They can often advise you on the best solution to solve the issue in a speedy and effective manner.