• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's simple to repair a damaged window handle with the right tools. It's important to identify the kind of handle you have as well as the size of its spindle before purchasing an alternative.

Older uPVC windows use cockspur window handles which have an extension spur that can lock over a cockspur wedge striker plate. They can be left- or right-handed and should be matched when replacing.

What kind of lock or handle do you have? I have

There are a myriad of upvc window locks and handles, each with its particular advantages and uses. The type of handle you are using will determine how easy it is to open your windows and if the locking mechanism works in the way you want it to. Over time, and with regular use, the upvc handles on your windows can get worn out and damaged. This makes them less secure and less effective. In some cases, they may even fall off completely. It is crucial to fix your upvc window handles as soon as you notice them falling off. This will prevent possible break-ins and ensure that your home is secure.

The good news is that replacing your window handles made of upvc is a fairly simple job that can be completed by almost anyone. With a few basic tools and the right knowledge it's a simple process that shouldn't take longer than a couple of minutes. You must be aware of the type of handle or lock that you have on your window. This will help you choose the correct replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are usually located on the side of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle and into the frame of the window to activate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are secured to the frame of the window with a single screw and are less secure than other kinds of window glass replacement near me handles.

Handles that tilt and turn

In contrast to other handles made of upvc that are tilt and turn, these handles can both be rotated to open the window, and the handle can be tilted to the side for ventilation. In general, they have a 7mm spindle on the side of the handle. They are available in left and right handed versions.

It is essential to know the size of the spindle when purchasing a new upvc handles. Not all are the exact same size. Drop something into the middle of the hole to check the length. This is the length of the spindle that will fit your window.

What is the spindle?

uPVC window handles operate similarly like doors. By turning the handle, you will be able to operate a latch within the frame. The window then opens and shut. The handles can become damaged, especially if used frequently or exposed to harsh environments. This could mean that you have to replace your uPVC windows handles as they may not operate the window properly anymore.

There are several different types of uPVC handles that are available, comprising Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. This is why it is essential to know the kind of handle you have on your uPVC window to find the right replacement for it.

You can determine the type of uPVC handle you are using by looking at the base section of the handle. A snap-in covers should be over the screw that holds the handle's base in place. Take it off and you should be able to see the second holding screw at the opposite end of the base section of the handle. After both screws have been removed and you are able to remove the handle from the uPVC.

After removing the uPVC handle, remove it from the locking mechanism. Be sure to note the length of the spindle, as you will need to ensure that you buy one that is the same length as the original handle and locking mechanism.

The spindle wears out and is unable to operate the locking mechanism. This can be caused by corrosion, damage due to frequent use, or a loosening locking mechanism. If this occurs, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

In the course of time and daily use, window handles can become damaged or broken, and if this happens it is important to repair them as quickly as possible to ensure the safety of your home. Fortunately, replacing a worn or damaged handle is a relatively simple job that can be accomplished in just over one minute and doesn't require any specialized tools.

The first step to remove the old handle is to remove the screw located at the top of the base of the handle. Once this is removed the handle can be pulled away from the base section. There will be a second screw that is located at the bottom of the handle base, and it can be removed as well. After these two screws are removed, the handle will be removed from the window's base.

After the handle has been removed, take the new handle and line up the fixing holes with the holes currently in the window frame. There may be a little cap or sticker on the new handle, so take off the caps if needed, and then screw the handle into the frame. It is important to check that the handle works once it has been installed. Turn the handle around and make sure that the lock mechanism is activated.

Espag handles have spindles that extend out of the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the frame's outer or the transom bar cross member inside the window.

Once you have installed the new handle, place the spindle into the window lock and tighten it. Once the handle is securely fixated and secured, replace the snap-in cover and screw cap (if appropriate). When the handle is ready for use, you can open and close the window a couple of times to ensure it works correctly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't a big deal and the process is quite simple. All you need is a screwdriver and a bit of patience. First, ensure that the handle that you are replacing is unlocked. Then, remove any screws visible. You could also replace them with screw caps. After the handle has been removed and you are ready to take an note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine the kind of handle you'll need to purchase.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle runs through the handle to operate the locking mechanism in the window frame. When the handle is turned, it opens the latch on the window and allows it to open. In regular use and time, espagnolette handles may become damaged.

Cadenza handles are a form of uPVC handle that is usually employed with tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. You can replace them with the same procedure as you would do for handles made of espagnolette however, make sure that the new handle is angled and not flat.

Once you have decided on the right handle for you, you can simply place the new handle to the existing screw holes, and then screw it in the appropriate position. After that, you can put the screws on and test the new handle. This is accomplished by shifting the handle from the locked to the unlocked position and vice versa several times. It may be worth contacting an expert to determine if you can resolve any problems. They can provide advice on how to resolve the problem in a timely and efficient way.