• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. It is crucial to keep the same dimensions as the handles that were previously used when replacing them.

The top screw's location as well as the lever and keyhole size are the three measurements that you need to determine. Check the size guide for help with this.

Inline Lever/Lever

A lever/lever door handle is a modern handle that can be installed on doors that are new or replacement. This style door handle is available in a variety of designs and finishes. A variety of manufacturers provide this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are perfect for multi point lock doors that require a heavy duty design. The handles are inline and operate off the same spindle and screw fixings so they can be easily fitted to doors made of uPVC/Composite, either new or old.

The spring lever design allows the handle to be set and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200,000 cycles. This helps ensure that the finish is of high quality and performance is maintained over time. The lever that is sprung can be reduced to accommodate more locks. This is especially useful for narrower door frames in which the cylinder is further back. A shorter lever can be used on doors with a latch that can be opened by the thumb located on the inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles commonly found on doors. These handle types are either operated by one spindle or two spindles, inline or offset. They are typically utilized on UPVC doors with double glazed door handle repair glazing and come in a range of finishes and variations.

The handles are available in a variety of finishes, including White Chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This gives the handle a high performance and durability to serve the purpose it was designed for.

All UPVC lever pads for handles include a spindle and screws and can be installed on the uPVC door. The backplate fixing centers of 211mm allow for a wider size of handle which is often a benefit when replacing a faulty or worn multi-point door lock mechanism. These levers for handles are also sprung, solving the problem of door handle repairs near me handles sagging out of the horizontal position when they are not in use.

When selecting a replacement upvc door handle repairs near me handle and spindle it is crucial to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is also referred to as the 'handle centre' or 'cylinder centres' and is a critical aspect in ensuring that you have the right handles.

When you have the right PZ size you will then have to ensure that the handle lever pads and push pads are a suitable shape for the American with Disabilities Act (ADA) compatible handles you need for your doors. These are typically round or square, with an internal lever, and an external push pad.

The majority of the UPVC Lever Pads we sell are spring-loaded. This means they can be reverted to a horizontal position when not in use, rather than hanging and possibly securing to the frame. This stops draughts from entering the property. You will also find that the majority of UPVC handle lever pad style handles are hand-operated which allows you to place them on either side of the door.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. They work by using a key to unlock a cylinder that is then revealed with pins that can be aligned with the pins in the lock body and allow them to rotate a revolving cam, thus opening the door. Euro Cylinders are available with up to six pins. Doors that are internal and external require different levels of security.

The selection of a cylinder is essential. It is based on the use that your doors and handles receive. For instance, exterior doors require an extra secure cylinder, while internal doors can be secured with a standard cylinder. Some cylinders have extra features that can increase security, for instance, anti drill or anti bump properties.

To make sure that the euro cylinder is of the right size for your door, it should be measured correctly. The cylinder should be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is best to do this while the lock is in place, but when this isn't possible, you can remove it to measure. It is crucial to not have a cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.

The design of the latest cylinders has anti-drilling and bump resistance features. They are designed to decrease the chances of an attack by forcing the cylinder to rotate in a different direction. This can to deflect attacks and protect your door.

There are cylinders that have been designed to resist snapping. This is a common occurrence on cylinders. A special tool is used to break the lock's break line and the front of the cylinder is snapped off. This is faster and more straightforward than opening the door with multipoint locks and leaves no evidence of a burglary, which can impede an insurance claim.

Spring Cassette

This spring cassette is found inside the base plate of the door handle. It provides a sprung solution to help return your multipoint lock handles to their normal position after use. Previously a lot of these types of handle did not have a spring built into them, and as a result, they tend to droop or 'drop' once the locking mechanism is disengaged. This simple part is the best way to address this issue. It also prevents your upvc door from becoming stuck in the closed or open position as they aren't easy to close manually.

These spring cassettes have been specifically designed to be used with multipoint locks sprung They will not work with non-sprung multipoint handles. You will need to have a hole specifically cut in your backplate in order for them to fit (please check the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the door handle backplate of various brands of uPVC doors. They are sold as one unit. They have a square-cut out that can accommodate an 8mm shaft.

These spring cassettes provide a great value solution to the issue of door handles that have become sagging. They are simple to put in and will extend the lifespan of your uPVC doors. Please contact our team for more information about our wide range of repair upvc door handle accessories and spares. We are on hand to help and happy to offer professional advice.