• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a discreet device which can be installed without causing damage to your vehicle. It will not allow you to start your car unless you have entered the correct sequence of buttons in your vehicle. This is similar to a mobile password.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by blocking the engine from starting until it has the correct PIN code. This is done without modifying the vehicle, and is not detected by thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This is similar to the one used by car makers for a long time. However, thieves cannot bypass it with a new key or key relay technology, as they can with factory fitted systems.

A Ghost can be fitted to any vehicle, van motorhome, caravan, or bicycle with an engine. It's compatible with all the popular brands of vehicles. The same system is compatible with electric vehicles. It's a great alternative to locking the steering wheel and wheel clamps that can be installed with little effort.

When the Ghost is activated, it will block all buttons in your vehicle and stop the ignition from being started unless a PIN code has been entered first. You can enter the code manually or through the Android or Apple app. If a code that is incorrectly entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great method to discourage thieves. If the vehicle can't be started and they are unable to get it started, they will leave.

The ghost immobiliser installation near me is a weatherproof, small device that can be hidden away in the most inaccessible parts of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also simple to remove if you decide to switch vehicles, or give it to the valet or service center parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a number of insurance companies. It also comes with an emergency Pin Code override and features the Service/Valet Mode which can be activated with an app button or using your key fob.

Disarm

Ghost immobilisers, unlike mechanical anti-theft devices that can be removed, are concealed in the car. Even if they were found and stolen, thieves would not be able start the car. They are nearly impossible to bypass or hack. A ghost immobiliser is protected from key cloning and signal jamming and devices spoofing. These are techniques thieves use to gain access into cars that have standard immobilisers.

The immobiliser sends a code to the ECU. If a incorrect code is received and the vehicle doesn't start since the engine won't start. While it is possible to disable the ghost immobiliser using software, this would be very laborious and time-consuming. The software must be installed and used by a authorized installer.

The Ghost immobiliser, a small system, is hidden within the vehicle's wiring loom. It is inaccessible to the naked eyes once installed. It will not show up on diagnostic systems, there are no LED indicators and it will not communicate with the engine through the OBD port. It communicates without sound through the CAN data circuit.

The system will block the vehicle from starting unless it is given a specific PIN code sequence. This can be entered using buttons on the steering wheel and door panels as well as the central console. This is a safer way to protect your car as it does not require a key fob or remote control.

Ghost also comes with a service mode that can be turned on via the mobile application. This allows you to give your keys to someone else to use for valet parking or service without needing to enter a disarm sequence.

You should never remove the system on your Ghost by yourself, no matter whether it is in service mode. This could cause damage to your engine. It is recommended that you contact an TASSA certified installer who can remove the system safely and properly. Our newest GHOST II immobilisers come with an exclusive QR fingerprint sticker that is hidden in various locations of your vehicle. which are linked to our international security register - in the event the system is removed and then sold on the black market this will connect it back to the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. This system is a smart key that shields your vehicle from theft. The Ghost system will automatically switch on the hazard lights and stop the engine when the ignition is on and the vehicle is in a stationary position. This gives the driver or passengers enough time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is once again allowed to start.

The Ghost system, unlike other competitors, has an electronic timer and controller that will close the valve that shuts off fuel after a predetermined time. This is even if the ignition remains on. The delay time frame must be long enough to allow the victim of the vehicle to drive away from the site of the incident and to maintain a sufficient distance from the vehicle that is stalled before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra level of security that prevents common hacking methods that are used to hack into modern vehicles like relay attacks, key range extending and ECU swapping. The Ghost system communicates in a non-intrusive way and does not emit signals that can be snatched by thieves with codes-grabbing or RF scanning technology.

The Ghost system also features the option of a Service/Valet mode that allows your vehicle to be temporarily started and driven without the requirement of a PIN code. This is ideal if you park your car and only need to leave it briefly for a few minutes, like to open the garage door or place groceries in the boot. The system will be able to exit service mode based on speed and time or by using the easy PIN code input process that gives you total security knowing that only YOU are able to use your car!

Keyless Entry

With the increasing trend of car thefts that are not involving contact, many people are considering additional security options. This is especially true for those who have put time or money in personalizing their vehicles and own expensive or rare vehicles. Immobilisers that are added to your vehicle can be a good method to stop this kind of theft since they prevent your vehicle from starting until the proper pin code is entered along with your key fob.

Immobilisers are designed to be used on various vehicle circuits, including ones that control starter motors as well as fuel pumps. They also have the capability of shutting the car alarm to draw attention and deter any potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit and they stop a burglar trying to get around it by installing a brand new ECU or using a key programmer. The immobilisers can be installed discreetly in your vehicle, leaving no trace and are totally inaccessible to the tools high-tech thieves employ.

The Ghost immobiliser is different from other systems which require the driver to wear an app or tag. Instead, you are able to choose your personal pin sequence by pressing an image on your door, steering panel, and centre console. The pin can be changed as often as you like, meaning it is as secure as a credit card and is even more difficult to crack because it requires up to 20 presses.

Ghost also offers Valet/Service mode, which permits users to deactivate it when you are going to hand over your vehicle to valet parking, or service. This allows the system to function within certain parameters such as a 30 mph speed limit. It can then be reactivated with the original key or the appropriate entry code.

This makes it the most effective and secure aftermarket CAN immobiliser available on the market and is fully insurance-approved by Thatcham as an add-on to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card that contains your unique QR codes, along with an emergency code that is safe. They are all stored in your wallet or purse.