• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

fiat 500 key not working 500 Key Cover Fiat 500 Fob Replacement

If your 500 keyfob ceases working, try a different one to determine if it will be detected by the car. If it does, then the issue is likely to be related to the original fob's battery, or water damage.

First, replace the battery. Make sure that the new CR2032 coin battery is properly inserted with the "+" side facing down in the fob.

Dead Battery

Most of the time when a fob won't work, it's just because the battery is dead. It's easy to fix and the majority of fobs will warn you when the battery is running low. There are instructions on YouTube for almost any key fob for your car, or in your owner's manual. You can also change it by taking it to an expert locksmith or the dealer who supplied it to you.

Sometimes, a fob may be inoperable and there could be a problem with the circuit board inside. It is rare however, it can occur. If you drop the fob on a hard object, it can damage the internal chip. This could also happen if you use an aftermarket key and the fob does not work. In this instance it is essential to see a dealer or locksmith to have the key reset to make it compatible with your 500.

One 2012 fiat punto spare key cut 500 Flip Key Remote that resembles Ilco brand with lock, unlock and trunk buttons. It is a replacement fiat key keyless entry remote (will require cutting & programmed by locksmith)

Damaged Chip

Fiat 500 key fobs are wireless devices that send a signal to the car whenever you press the button. It is equipped with a microchip that contains information about the code needed to connect with your car. If the chip is damaged it will not transmit the correct code, and the car will not start. It is possible to repair this type of damage and a locksmith will help. United Locksmith is capable of completing this service for classic models as well as newer ones, so don't feel in a rush to call them.

Locksmiths can program the new key fob. It's less expensive to do this than going to the dealer and works just as well. You will need to provide certain information to the locksmith, such as the year in which your car was manufactured and the model.

If you are not sure of the best solution to this issue, try rub the chip with a US dollar bill. The copper in the bill is abrasive, and can remove oxidation and dirt. However, it won't cause harm to the microchip. If the chip is physically damaged it might not be in a position to be repaired. This could happen if drop it, run it over by your vehicle, or some other kind of physical force.

Water Damage

If you've accidentally dropped your keys in the water, put them in your pocket while swimming at the beach, or splashed them with water on a rainy day, it's likely that your fob will suffer from water damage. Even if it only has a little water on the key, this can cause serious issues with the electronics inside and stop it from functioning efficiently.

The good news is that you can often solve this issue by removing the fob's key and using a an old towel to scrub it of any dirt or water that remains. After the fob is dry it is possible to replace the battery and it should begin working properly.

You can also take the fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. The professionals are able to utilize special equipment to make sure that the key fob works with the computer system in your car.

If your Fiat 500's keys fob isn't working, it can be stressful and frustrating. It's expensive and cumbersome to take your key fob to a dealer. A locksmith can replace your key fob without needing to visit the dealership. Because of this, they are a better choice than an auto dealer.

Pairing Issues

When you drop your key fob or it stops working and there's nothing going on this could be because of the chip that has gone awry. It could be due to water damage or the battery is dead.

Often times this can be done by following the instructions in your owner's guide. If you're having problems or your manual isn't working and you need to have an automotive locksmith complete this task. This will ensure that the chip isn't damaged and is likely to be the most cost-effective solution.

A few hundred owners have reported that their key fobs will not lock their cars. This could be a major issue if you're driving to the gas station to fill up. Some owners have even reported their 500's locking mechanism breaking and having to replace the entire intermediate shaft for steering. This issue was described in a technical support bulletin (TSB) from fiat key fob.

A reputable locksmith will assist you in the event that your Fiat is experiencing issues. They'll duplicate your key, or create a new one that will unlock and start your vehicle. They are able to do this without looking at your old key, and it's typically less expensive than buying a key from the dealer.