• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may prefer a security screen that also has a window. This will give you the best of both.

2. Sagging

upvc window repairs near me windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can also be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and do a test fitting. The corner joints of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to change a window hinge but it's much easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges can also become disaligned as a result of wear, creating a gap where the sash and frame meet. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them re-aligned or replaced. Second, the interlock can be disaligned. This happens on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace them.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert immediately.