• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your home until a professional is able to repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap between the window and the door is large, you might want to use security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. After that, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. The first step is to close the window and perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in upvc window repair (read the full info here) windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

Make sure that the drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens with the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It is essentially a simple process, but it's simpler when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form between the sash and the frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. In addition, the interlock could be misaligned. It is located on the hinge side and could require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to stop draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the windowsill on top. These will keep your home warm by blocking cold air.

Your upvc window repairs near me windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult a professional immediately.