• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy task and, with the right tools, it can be done quite quickly. But it's essential to identify the type of handle and the spindle's length prior to purchasing a replacement.

Older uPVC window handles have a spur which protrudes and locks over the cockspur wedge striker. These can be either left or right-handed and need to match when replacing.

What kind of lock and handle do I need?

There are many upvc glass window replacements near me locks and handles each with their distinct advantages and functions. The type of handle you have will determine how easy it is to open your windows and whether or not the locking mechanism works in the way you want it to. As time passes, and with regular use the handles made of upvc on your windows may be damaged and worn out. This makes them less secure and effective. In some cases they may even fall completely off. If you notice that your upvc window handles have been removed, it's crucial to repair them as quickly as you can. This will help prevent burglaries and will keep your home safe.

It is a good thing that replacing your upvc window handles is a simple task that can be completed by nearly everyone. You will need a few basic tools, but with proper knowledge, it's simple and should only take a few minutes. To begin, you will need to identify the type of lock and handle that you have on your window and then find the perfect replacement.

Inline Espagnolette Handles

They are typically found on the side of the window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles also have a spindle that runs through the centre of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame of the window and are not as secure as other types of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be rotated for opening the window, and then lowered into the window to ventilate. They have a 7mm spindle at the back and are available both in right and left-handed versions.

It is important to measure the spindle size when buying replacement upvc handle. There are a few that are exactly the same size. Drop something into the middle of the hole to measure the length. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles operate in a similar way as doors. By turning the handle, you will be able to open a latch in the frame. The window then opens and closed. However, sometimes handles can be damaged, particularly if they are regularly used or exposed to extreme weather conditions. This can leave you needing to replace your uPVC handles for windows as they may not be able to operate the window correctly in the future.

There are a variety of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handle options. They are designed to fit inside the uPVC frames in different ways. Each handle has a particular spindle that is used to lock the mechanism into the window. This is why it is important to know the type of handle is installed on your uPVC window so you can find the right replacement glass for window for it.

The base of the handle will tell you what kind of uPVC it is. There should be a'snap in' cover over one screw which holds the handle base in place. Take it off and you should be able see the second screw on the opposite side of the base section of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

After taking off the uPVC handle, remove it from the locking mechanism. Be sure to note the length of the spindle as you'll need to make sure that you purchase an alternative that is the same length as the original handle and locking mechanism.

The primary issue with window handle problems with uPVC is that the spindle gets worn out and cannot longer operate the locking mechanism. This can be due to damage caused by constant use or a loosening of the locking mechanism, or even rust over time. If this happens, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can become damaged or broken over time. It is essential to repair them as quickly a possible to ensure your safety. It is simple to replace a worn or damaged handle. The task can be accomplished in under one minute without the need of special tools.

To remove the old handle, you must first remove the screw at the bottom of the handle. Once the screw is removed, the handle will be pulled away. There is a second screw that is located at the bottom of the handle base, and this can be removed too. When both screws are removed, the handle can be completely detached from the base section of the window.

After removing the old handle, align the fixing holes of the new handle to the existing holes in the window frame. If there is a cap or sticker on the new handle, take it off it if required and put the handle back in the appropriate position. It is crucial to verify whether the handle functions after it is installed. Turn the handle over and make sure that the lock mechanism is working.

Espag handles come with spindles that protrude from the handle and slots into the multipoint locking mechanism of the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.

Once you have the new handle in place, insert the spindle into the window lock and then tighten it down. Once the handle is securely fixed, replace the'snap in' cover and the screw cap (if appropriate). Now that the handle is ready for use, simply open and close the window a few times to ensure it works correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult and the process is quite simple. You only need a screwdriver and a bit of perseverance. First, ensure that the old handle is unlocked. Remove any screws that are visible. You can also replace them with screw caps. After the handle has been removed, you need to make an note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine what kind of handle to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. The spindle runs through the handle to control the locking mechanism within the frame of the window. The handle releases the latch, allowing the window to open. Over time and through regular use, espagnolette handles could be damaged or damaged which is why it is essential to find a replacement.

Cadenza handles are a type of uPVC handle that is usually used in tilt and turn windows. They feature a protruding knife that is operated by a multi-point locking mechanism within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. They can be replaced using the same method as espagnolette handles, however you will need to ensure that the new handle has a curved blade as opposed to flat ones.

Once you have determined the right handle to purchase You can simply align the new handle with the existing screw holes and then screw it into place. Then, put the screws on and test your new handle. This is done by moving the handle from the locked to the unlocked position and the reverse direction several times. It is possible to contact an expert to see if you can resolve any issues. They can offer advice on how to solve the issue in a timely and efficient way.