• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. If you have Double glazed window Repairs near me-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers to help the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need open the window to get to the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs near me-glazed glass it is more likely that the issue is more related to the seal, not the frame. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in the breeze. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. If they are beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it may be possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you encounter any issues with your Upvc window it is recommended to speak with a professional immediately.