• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's how to open lock without key to Open Your Car Without Damage

If you've locked your keys inside your car, don't be afraid. There are numerous techniques you can try prior to calling a locksmith, or a roadside assistance service.

For example, you can make use of a shoelace with a slip knot to secure an old post lock or a wire coat hanger that you twist and then mold into hook. You can also use a door wedge or inflatable wedge.

Pump Wedge

If you've been stuck in a locked car and no DIY solutions like shoestrings, wire hangers or wedges work then it's time to contact an expert. A locksmith or repo service provider could have lockout tools that can allow you to unlock your vehicle without causing damage to it.

If they do, be sure you use them correctly. Know where to insert the wedge tool. A lot of people place the wedge tool in the upper corner of the door, which is the most vulnerable. This is a bad move because you could damage the weather stripping and wires within the doors. The wedge should be placed where you can see the biggest gap and also where the greatest leverage is.

The Pump Wedge is a top-quality inflatable wedge that is constructed of durable, non-marring vinyl material. It is placed between the vehicle's door and door frame, and then is inflated to create a gap. This allows you to slide in other tools like an opening tool for cars with a long reach rod. It has a hook at one end that you can make into a shape to hold the latch on the door handle.

This can be done using two wooden door stops. You can use them to open the gap at the back of the door. You could also make use of a slim-Jim, a thin strip of metal that is bent into a hook and used to attach the lock. This method requires practice, however, since you should be cautious not to damage the weather stripping on the door.

A shoelace is a good option, but it works only on older vehicles that don't have a push button to unlock the mechanism. You can tie a slip knot through the middle of the lace and then move it up and down the door's seam until you locate the latch. Then, you can move the lace until it catches the lock, tighten the slip knot and pull it upwards. This method can be more difficult than other ones and can scratch the paint or dinge the door trim if you're not vigilant.

Inflatable Wedge

If you own an inflatable wedge-shaped car door opener, you will be able to quickly unlock your vehicle without the need for prying or slim jim tools. The wedges can be positioned between the window and frame of the car. They will, when inflated, create a large opening to put in a device with a long reach, such as a button grabber or slim jim. This method is far safer than using a tool to pry and can be used even if you don't have access an screwdriver.

A wire coat hanger shaped into a hook is a different method to unlock a car without damaging the exterior or interior. You can use this to grasp the lock button, and it may work better than a flat screwdriver as it is less likely to cause damage to the car's paint. However, you should examine the other doors to ensure there are no other ways to gain access to the door.

You can also use a plastic bag twisted into a noose or v-shaped shape. Be careful not to tear the bag since it can make the situation worse. This method is particularly useful if you can't find the lock button. It may not be as reliable as using a wedge or a metal coat hanger, how to open lock without key but it can help when you're in a tight spot.

Stay safe and remain calm. There are several solutions to this issue. If you've read this article, you will be prepared for any situation that could occur. You can unlock your car by following our directions. This will avoid unnecessary stress and damage. And of course, if you're able to, make sure to take your keys with you when leaving your vehicle.

Shoelace

Locked out of your car is one of those "oh crap" moments that can ruin your day. It's best to have a few tools that you can use to open your car without breaking any windows. Certain of these items are simple to find and can help you avoid the expense of an locksmith or waiting for roadside assistance to arrive.

A shoelace, or twine, is an excellent tool for unlocking the car. It's simple to use and works on a variety of cars. The most important thing to consider is a car equipped with post locks. They stack vertically on the window sill and are easily accessible from outside the car. Make use of a shoelace and an elongated slip knot to get my keys out of my car the job done. Then, wiggle the shoelace into the crack between windows and doors. Once the slip knot has been positioned, pull the ends of the string upwards to tighten it.

This method may only work on older models with a hooked lock. If you have a screwdriver handy, it can be used to open the door more aggressively. Another option is to grab an object from a nearby object, like a doorframe, or a piece of wood, and then stick it inside the window frame to make space for the rod that you will use to push the lock's interior button.

Although the methods above might be safe for a lot of drivers, it is best to seek help if you can. This will prevent further damage to your car and reduce the risk of an accident due to stress. If you don't have a mobile phone or are unable to reach a helpline, it is important to inform trusted family members and acquaintances know where the vehicle is parked. Additionally having a spare set of keys could be kept in a easily accessible location on the vehicle, so you can get them back if required.

Wire Hanger

There is no doubt that locking your keys in your car could be a stressful situation. The key is to stay at peace and think through your options carefully. You will avoid making the situation worse if do not panic.

You can use a modified wire hanger for entry into your car. You'll need to uncoil the coat hanger to ensure that it has a straight slant and a hook, which you can use to manipulate the lock rod within your door. Once you reach the rod, you will be able to pull it upwards to open the door.

You can also use a rod, or even a metal piece from your vehicle unlock services. You should ensure that you don't damage the vehicle while doing this. It is best to avoid having to disassemble the vehicle. This method is more effective on older vehicles than newer models. However it can be utilized on cars with unique outer door handles.

You can do the same trick with the shoestring tied in with a slip knot. This can also be done on a post lock, but it will be a bit more difficult to operate because you'll be relying on the tension from the string to hold the lock. You can do this by threading a shoestring into the tiny hole in the weatherstripping of your vehicle's doors. After the string is in, you can pull it in a tight manner to create a loop that will wrap around the lock, allowing you to take it off. This method is extremely efficient if you're lucky enough to locate the lock in the right place.