• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, window repair it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window repair will generally fit within the frame of the previous one easily. If you have double glazed window repairs-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you may want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues that include sagging. A sagging upvc window repair window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've repositioned your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, window repair you'll need to shut the window and do an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with ease, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to change the hinges on a window but it's much easier if someone else helps hold the frame.

Check that the uPVC hinges open and close in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it is feasible to give them a clean but in some cases it might be necessary to have them replaced.

The next common reason for draughts are the window seals, these can become worn down or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it's recommended to seek assistance from a professional immediately.