• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, Window doctor which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is substantial, you may prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they can suffer from a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time, Window Doctor this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously may require removal before a new layer is applied. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window doctor. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double glazing repair-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window doctor is difficult to open or it opens with a breeze. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. Sending us photos via our website will often solve the issue. We are more than happy to give suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges, also due to wear and tear may become displaced, which will cause an opening to appear between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.