• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback with an unusual engine setup. It can be a bit noisy, but it's still enjoyable to drive.

The battery for the key fob in the Nissan Juke has to be replaced every two years or more, or if the battery is low. It is easy to do at home, but you'll need a few tools.

Dead Coin Battery

If the key fob of your Nissan Juke has stopped working, check the battery of your coin. It could be dead and needs to be replaced. This is a simple fix that only takes a few moments. Flip the fob upside down and you can access the tiny latch/release on the back. Remove the old battery and then pop in an alternative one, making sure it's facing down on the fob. Line between the two halves of the fob with care.

If the fob was exposed to water, it needs to be cleaned prior to putting the new battery into. This can be accomplished by using a paper towel, isopropyl alcohol or electronic cleaner, and then allowing it to dry completely before re-inserting battery.

To start the car the key fob needs to be paired with the car. This can be done according to the instructions in your owner's manual, or using an OBDII scan. The most likely reason for why the key fob was not working is because it was not paired. It is also possible that the fob has defective chip, however this is extremely rare. In this case, a new receiver module may be needed. If this is the situation the receiver module will need to be replaced by an experienced technician.

Water Damage

Key fobs are battery operated, and these batteries should be replaced every two years or every first sign of your car not responding when you hit the "start" button. The key's rubber seals keep out water, but submerging the key fob in ocean or pool water can damage the electronic chip. If this happens you'll need an alternative key from Nissan or a locksmith.

If the key fob has an active chip It's likely that the computer has lost its connection to it, which can happen for any number of reasons. A simple restart of your car can fix this, but should the key be showing the "Key ID" error message, you'll have to contact Nissan or an auto locksmith for assistance.

Three common causes are battery that is dead on the key fob, a key that is not programmed, and an unrepaired key fob. The first two issues are fairly simple to fix while the third is more difficult to identify and fix but is fixable with patience. WhoCanFixMyCar lets you compare Nissan Key replacement car keys nissan prices in your local area and book your repair. It takes just a few minutes, and you can even read reviews of customers from local garages, Nissan car mechanics and dealerships before deciding.

Faulty Chip

The key fob inside your Nissan Juke has a special chip that transmits an indication to the car when you turn it. If the chip is not functioning properly, it can cause the key to stop working. If this happens, the problem can be resolved only by replacing the key. There are a variety of reasons your Nissan Juke's key may be faulty, including water damage or a dead coin battery or a malfunctioning receiver module.

If your key fob stopped working after a wash or even a bath, local it is important to examine the chip for water damage. Check that the clips holding it are not loose and that the chip is not exposed to water. If you observe any signs of water damage, you can try removing the battery, then wiping the electronic component with isopropyl alcohol or an electronic cleaner.

If the chip is damaged, you will need to visit your local locksmith or dealership. They will require the year, make, and model of your vehicle in order to locate the replacement. It is also necessary to record your VIN (Vehicle ID Number) so that the dealer or locksmith can know exactly which key you have. This will enable them to search for the correct key code and ensure that they are cutting the correct key.

Faulty Receiver Module

The key fob sends radio frequency signals to your car to perform several functions. The key fob can open your trunk when you are rushing with your groceries to the car or start your vehicle by pressing a button on the fob. It can also open your windows and turn on the horn in the event that you lock the keys inside your car.

If the key fob does not function, it could be due a problem in the receiver module. The receiver modules are tuned to ensure that they can pick up specific frequencies that correspond to signals generated by Nissan key fobs. If your car is equipped with an inoperable receiver module it will not respond to any signal sent by the key fob.

It is always best to have an extra Nissan key fob in case your original key is lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and will save you the difficulty of locking your keys in your car or losing them.

If your Nissan Juke key fob was exposed to clean tap water or rain the issue can be solved by cleaning it with isopropyl alcohol or an electronic cleaner. If the chip is fried you'll need to purchase an alternative keyfob that could be coded for your vehicle by a locksmith or dealer.