• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is significant, you may need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may be affected by a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you cannot reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and uPVC repair cause them to lose tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles could also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. You'll first need to close the window and do an experiment fitting. The corner joints of the sash must align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most of the time, upvc repairs window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window harder to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze it could be hinges that are at fault. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. Changing a window hinge is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. First, the hinges because of wear and tear, could become misaligned. This can cause gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to have them realigned. Second, the interlock can be misaligned. This is located on the hinge side and might require to be cleaned. In certain instances it is possible to replace them.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc window repairs will provide excellent security and insulation for your home. However, it is important to recognise that all windows have a lifespan and there may come an point at which it is more efficient to replace them than repair them. If you have any problems with your Upvc window, it's best to consult a professional immediately.