• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows can get out of balance and crack. Pam browses the internet for salvaged wavy glasses and keeps an eye open for discarded metal sashweights. She then hunts for replacements in the form of washers or nuts to help balance her window.

Pam beds each pane with a rope of glazing compound that she works into the rabbet groove, or contractor pocket, around the opening. This reduces drafts and reduce the cost of heat loss.

Sticking Sashes

It's a nightmare if your double-hung windows get stuck. They'll sway in the event of storms, and you'll lose your view. On the other hand, a window that's too loose will allow external air and noise in and your energy bills may increase. Both scenarios are not ideal, but both can be addressed with the appropriate tools and perseverance.

A common issue with old windows with weighted sash is that paint may accumulate in the channels they slide over, causing them blockage. The majority of these issues can be solved by cleaning and oiling the tracks.

Begin by removing the old caulking between the window stop (the one inside) and the window frame. Scrape off any paint that has built up. Use a sharp knife and put plastic sheets and an air-collecting vacuum cleaner beneath the surface to collect any paint dust or chips.

Then, clean the tracks with a dry cloth and apply a silicone-based lubricant for more smooth glide. The lubricant can be found in a majority of home improvement stores or on the internet. Then, move the sash upwards or down to test it.

If it still jams, there could be a problem with the sash cord. Verify whether the cord is stuck or hanging from the sash, or if it's snapped. If this is the case, you'll have to reconnect the upvc window repairs.

Another possible reason for a jam is the pin that holds the meeting rail in place has slipped out. It can be difficult to fix and you will have to call an expert most of the time.

If a pin doesn't fall out but the wood has become swollen or warped it's recommended to apply a wood hardener to it. This is a quick drying liquid that can aid in restoring damaged wood, which means you'll be able to fix your window sash without having to remove it completely. After you've used it you'll be able to break the two sashes by placing a piece of wood on top of the bottom corner where they meet and tapping it lightly using the hammer.

Draughts

Draughts are a major problem for old sash windows particularly during winter months. Often caused by rotten timbers or cracked putty, worn weights for sash or sash cords that aren't balanced which can allow cold air to seep in around the window, making it difficult to keep your home warm. You can stop drafts by filling the gaps with expanding foam or using draught-excluding strips found in many hardware stores. These are effective, although they'll need to be replaced from time to time as the foam expands and gets worn away with use.

Gapseal is a longer-lasting solution. It's a spongy rubbly seal that you can cut and push into the gaps between the window frames of the sash. It can be used on its own or contractor with adhesive strips at the top and bottom. This is a bit costly and will have to be reapplied throughout the time of your windows' life, but it can provide an option for the long term and is simple to remove in the event that you want to open the window.

Another popular DIY draught proofing solution is to use cling wrap that is rolled up and placed into the gaps around your window. This is a reliable draught stopper, but the drawback is that it could block sash travel completely and pose an hazard to fire. The sash must be removed in order to reopen the window and the clingfilm needs to be reapplied every time the sash is closed.

A better option is to have your window sash professionally draughtproofed as part of a comprehensive refurbishment service. This can include new sash cords and parting beads, staff beads, lubrication of pulley wheels and rebalancing of the weights, as well as painting or staining the frames and sashes. This can bring the sash back to its original purpose, improve its energy efficiency, and repair any minor imperfections in the timber. It is less disruptive than removing windows, and can reduce draughts, increase the thermal performance, and drastically reduce the cost.

Decay

If your windows are sash and have suffered decay or damage, the good news is they are not necessarily beyond repair. The frames of these windows are usually made of high-quality timber. If you can restore them properly they can be repaired to ensure high performance for a long time. Regular inspections are key in ensuring that the wood is adequately ventilated. This will prevent moisture build-up that can lead to wood decay.

The majority of issues you'll encounter with sash windows are evident upon close examination, however some are more difficult to detect. Wood decay is particularly difficult to fix, as fungus eats the wood. While it is possible to repair wood that is rotten, the best way to avoid further decay is to keep the timber dry.

First, take off any paint from the hardware. It could be necessary to remove the bottom rail from the frame and also the rail that joins it (this will depend on the location of the sash). The "pocket covers", which are small pieces of wood placed on the frame's side that allow access to the weights should be removed. You may need to use a sharp knife for removing the pockets if they're painted or nailed into place. Once the pockets are gone, you can begin to chisel away any wood that is rotting, and then apply a high-quality water-resistant wood filler. Once the wood filler has dried, a primer coat should be applied to prevent further decay.

It is an excellent idea to examine the sash's weights inside the window too to make sure they are properly balanced and not pulling one side more than the other. If they are not balanced the sash could fall off its track and could cause damage to the frame. The sash weights can be replaced with new ones or contractor a new balance mechanism can be installed, which will stop the sashes from bouncing to the wrong side of the window frame.

Poor Security

As time passes sash windows are exposed to the elements, and are prone to deterioration due to weather and general wear. In time, this may cause wood decay, which is then required to be replaced, an expensive repair that has to be addressed as quickly as is possible. Wood decay can be spotted by water marks on the window, or the frame turning soft to touch. It is essential to speak with an expert to evaluate the situation, and determine if any repairs to the sash window are required.

In time, the bottom rails may also be damaged. This can be seen by the presence of water marks on the sill or the window becoming soft to the touch. A professional consultation will also be required to assess the situation and recommend any repair or replacement of window sash components.

It can be a real concern when triple or double windows are glazed and start to allow noise pollution back into the house. If this occurs the structural integrity could be at risk and the sash window may require replacement.

A typical problem with repairing sash windows is the sash becoming stuck in the frame. This can be caused by the cord snapping or problems with sash ratchets. If it's the latter the gentle pressure can help the upvc window repairs near me to be opened and then the ratchets need to be reset.

Removal of the sash from the frame and removing the tracks of any dirt or dust can assist in resolving this problem. After cleaning the tracks, remove any security fittings and then remove the sash cords or chains. The staff bead may be sealed with a draught-proof seal that will reduce the risk of draughts. This will also improve the finish of paint. Decorators caulk can be used to fill in the gap between the sash's box and the sash. This will improve the efficiency of the sash and also reduce the possibility of draughts.