• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair double glazing windows costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. If you have repairing double glazed windows-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you may think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window to access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and do a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a relatively easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. It's very simple to change a window hinge however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the right direction. This can be done by looking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or by inadequate installation at the factory. Sending us a picture via our website will often solve the issue. We are more than happy to offer advice.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and Repairs to uPVC Windows other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become unbalanced due to wear, causing a gap where the sash meets frame. If they're beyond repair, it might be necessary to get them re-aligned. Second, the interlock can be disaligned. It is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace them.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional immediately.