• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems such as sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to unblock the windows to access the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close your window and do an experiment fit. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, Repairs to uPVC Windows you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking used previously might need to be removed before a new layer can be put on. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze, it may be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be happy to give you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. If they are damaged beyond repair windows, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, can also be misaligned, and Repairs to uPVC Windows again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs to upvc windows. It is crucial to recognize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than repair them. If you are experiencing issues with your upvc window you should consult a professional as soon as possible.