• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this case you'll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you are going to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is large, you might want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. After that, using an screwdriver, take off the hinges at the top and uPVC repair bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will make your window more difficult to clean and lower its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass in your double glazing repair glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be corrected by a upvc window repairs window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens in a breeze. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. It's very simple to change a window hinge however it is easier if someone helps you hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The problem can be caused by opening the window improperly or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give suggestions.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also be misaligned due to wear, causing a gap where the sash and frame meet. If they are beyond repair, it could be required to realign them. Second, the interlock can be misaligned. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than repair them. If you have any problems with your Upvc window it is recommended to speak with an expert as soon as you can.