• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the distance between the window and the door is large, you might prefer security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to get at the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. Most often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or uPVC window repairs if it opens with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is essentially a very simple process but it can be easier if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc window repairs can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause gaps to develop between the sash and the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock may also become disaligned. It is located on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window doctor sill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.