• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case, you will need to source some plastic spacers that will assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may require removal before a new layer can be applied. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows repair near me are stiff to open, Pvc window repairs or slack and open with a breeze, it may be the hinges that are at fault. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's very simple to replace a hinge on a window however it is easier if someone else helps you hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrows on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window and can also become misaligned, again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time, and pvc Window repairs will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you have any problems with your Upvc Pvc Window Repairs, it's best to consult an expert immediately.