• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Sashes for windows must be checked regularly for mold, mildew and other damage. If you catch these issues early you will save money on repairs in the future.

The sash is the interior framing that moves vertically either up or down in windows that are open. This article will teach you how to make several simple sash repairs.

Weather Stripping

Wood upvc window repairs sashes give an elegant look to your home. When properly maintained, can last for many years. However, they can become damaged or degraded over time due to exposure to the elements and wear and wear and tear. Sash repair experts can restore windows to their original state and maintain their appearance much longer than replacement windows.

The first step to repair sash window damage is to fix weather stripping, which is found on both the sash as well as the frame. If it's loose or worn out, it could cause drafts and other problems. Start by identifying the window brand and the glass manufacturer's date (etched on the glass's corners or the aluminum spacers between panes). Then, take the sash off and mark its height and width, so you can find new weather stripping that matches.

Then, take the sash from the holder and place it on flat surfaces to allow you to access all four sides. If your sash was double glazing windows repair-hung, you must remove the ropes and weights that should fall into the pocket in the jamb lining. After removing the sash with the utility knife, you can remove the weather stripping from the old sash by hand or using a putty blade.

After the sash is cleaned, you can replace the parting stops. These are long pieces that divide the sashes. Pam likes to replace them with standard 1/2-inch-by 3/4-inch window trim from the lumberyard. However, you could also use scrap wood.

After removing the parting stop and trimming it to length after which, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound with your putty tool and let it dry for at least one day. Once it's fully cured, apply a top coat of acrylic latex paint. This will protect the putty, and give your sash an updated look.

Sash Hardware

The hardware that holds the windows sashes can become worn out with time and use. This could result in windows or doors that is difficult to open or close. It's good to know that replacing or fixing this hardware is usually easy and affordable. If a sash is difficult to operate you can try spraying some oil into the jamb channel, and then open it to see if this fixes the problem. If not, the issue is likely with the balance of the sash and you'll need to remove the sash to access the hardware.

Window sashes need to open and close with little effort. However, this may be a challenge if the weights have been worn out or the sash connecting rail isn't glazed. This issue can be due to a variety of factors, including an absence of maintenance or an unmatched weight rating.

If the hinge arms on windows begin to slide, this could cause the sash to drag, and then eventually to hit the frame in the opposite corner (Photo 1). To address this issue, first make sure the sash fits squarely in the opening of the frame and then take it out of the window. If the sash was fixed to the hinge arm, unbolt the hinge and replace it. (Photo 2). Install the new sash (Photo 3).

Old windows, particularly those in older homes, may be difficult to open and close, because of sagging hinges and an overall lack of energy efficiency. In most instances, a few easy repairs can turn these windows into smooth operators again and save the homeowner money on energy costs.

It is essential to have the tools you need before you begin. Mark the hinge channel location on the frame (Photo 1) with a pencil. This will help you get the channel back on the correct position after you've finished. Take the sash off, and remove all the hardware, including the parting beads cords, chains, and cords that help to hold the sash. A hot gun with nozzle shield and a medium setting will soften any hardened glue. Remove the old sash and store it in a labeled bag.

Sash Weights

Whether your window sash repairs are to replace a broken cord or to keep the windows functional, replacing worn out sash weights will improve sash operation and help reduce energy costs. Sash weights are heavy lead or iron cylinders enclosed in a concealed cavity and linked to the moveable the sash with a rope. They provide counterbalance that allows the window to be opened and closed without the use of electrical or mechanical devices. If they fail, sashweights are usually left unnoticed or disabled by homeowners.

A weight from a sash that fell out of the cavity is difficult to recover It is therefore important to locate a new one that fits properly. You will also require a new piece of string, a length sashcord and a few sashpulleys to secure the weights you are replacing to the cord.

Older wood windows are joined by mortise and tenon joints. Pin punch and hammer can be used to remove the wood pegs holding the parts together. The majority of these pegs are big on one side, but smaller on the other. It is important to remove first the smaller diameter sides. Later sashes made use of glue instead of pins. They can be cut by using a knife or mallets.

Once the sash has been removed, you can take off the sash stops and gain access to the pockets for weights. Usually, this is done through an opening in the bottom of each jamb. The hole is then covered with a wooden access panel that can be ripped off so that you can see the inner workings of the frame.

Once the sash is stopped and the access panel has been removed, Window Sash Repairs you are able to remove the weight you used and replace it. Be sure to weigh the sash first to ensure that the weights you have might not be the right size. After the new weight is installed, run an appropriate length of string through the pulling mechanism. Then, you can nail the string to the frame, but only leave a few inches of string hanging from the head for future adjustment.

Sash Cords

In most old double-hung window the chain or cord is attached to the weights. This supports and keeps the sashes within the jamb balanced. As time passes, these cords may break, making it impossible to raise the window. A new sash cable will give you the ability to raise and lower the sash and ensure it stays in place when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are usually fixed or screwed in and will need to be removed or repositioned. It may be possible to remove them with a hammer or chisel, however, it is best to lay out dust sheets before beginning any work.

Once the access panel is removed, you can begin working on the sash. Utilize a flat bar or chisel, to pry the narrow parting beads from their grooves. It is important to take your time as they're often stuck or nailed to the floor. If the sash is in place, remove the mortise and the tenon joints by using pin punch and hammer or screwdriver, and then take out the wood pegs attached to the components. The sash should be able to move freely, however it may require some lubrication in order to feel less stiff.

With the sash in an open position Take a measurement of the sash chain to extend from the pulley at the top of the jamb to the sash slot on the bottom. Cut the cord or chain and attach it in Step 6 above. You can do this with a hammer, nails, or screws. However nails are less likely to cause damage.

If you don't have an upgrade kit to replace the counterbalance system that was in place before, it is recommended to keep the original weights for balancing in place. It's not too expensive to purchase these from salvage shops for architectural purposes and they'll be simple to install once you have the sash open. Depending on the size and shape of your window you may require one or two sashweights to keep it open.